Contact Our Headquarters Today • 205.338.3366

Refractory Coatings & Refractory Mortars

Riverside Refractory, Inc’s specialty product line includes refractory coatings and mortars. To be classified as a refractory coating or mortar, our products have to meeting specific resistance and application standards. Refractory coatings are resistant to thermal shocks and high temperatures with a melting points between 1520 °C and 1830 °C. Certain refractory coatings have to be resistant to abrasion, gases or slag attacks depending on its intended application. Please review the individual product’s specification sheet for specific details.

Our refractories are available in trowel-able, spray-able, pump-able and gun-able forms that can be used in a multiple industries and applied to wide variety of applications. Please consult our product table for the proper application and method of installation.

MortarsMore InformationAir SetHeat SetPumpableDescription
Alaox
ALAOX 20-SLURRYPDS
SDS
x ALAOX 20-SLURRY is a pyrophyllite based slurry product with a heat setting phosphate binder system. This product was designed for hot applications only.
ALAOX 70-PLASTERPDS x ALAOX 70-PLASTER ia a high alumina phosphate bonded refractory for general maintenance repairs.
ALAOX 85PDS x ALAOX 85 is a high alumina mortar for general applications. This product will give superior performance in corrosive environments.
Alaset More Information Air Set Heat Set Pumpable Description
ALASET 2-95-DRYPDS
SDS
x ALASET 2-95-DRY is a siliceous composition formulated mortar.
ALASET 2-95PDS
SDS
x ALASET 2-95 is a siliceous composition formulated mortar.
ALASET 35-12-GRAPHITEPDS
SDS
x ALASET 35-12-GRAPHITE is an alumina based low iron, heat setting, super duty mortar with high strength at all temperature ranges. This product features graphite addition for non wetting qualities.
ALASET 40-3000-SPECIALPDS
SDS
x ALASET 40-3000 SPECIAL is a alumina based, low iron, air setting, super duty mortar with high strength at all temperature ranges.
ALASET 40-3000-STIFFPDS x ALASET 40-3000-STIFF is a alumina based, low iron, air setting, super duty mortar with high strength at all temperature ranges.
ALASET 60-DRYPDS
SDS
x ALASET 60-DRY is a high alumina, troweling air set mortar for general maintenance use. This product will give superior performance in corrosive environments.
GroutsMore InformationAir SetHeat SetPumpableDescription
ALAGROUT 13-DUSTPDS
SDS
x ALAGROUT 13-DUST is a fine silica dust including fly ash to provide a fine fluid powder for ceiling cracks.
ALAGROUT 15-60-SiCPDS
SDS
x x ALAGROUT 15-60-SIC is a silicon carbide, cement bonded grout.
ALAGROUT 30-30-SiCPDS
SDS
x x ALAGROUT 30-30-SIC is a silicon carbide, cement bonded grout.
ALAGROUT 45PDS
SDS
x x ALAGROUT 45 is a dry, air setting lightweight grout.
ALAGROUT 50PDS
SDS
x x ALAGROUT 50 is dry, air setting grout. This product is designed to be pumpable.
ALAGROUT 80PDS
SDS
x x ALAGROUT 80 is a high alumina, air setting grout. This has been designed to pump at a low water content and retain excellent strength in service.
ALAGROUT 90PDS
SDS
x x ALAGROUT 90 is a fused alumina pumpable product with tabular and bauxite additions with spinel forming capability.
Silica ClayMore InformationAir SetHeat SetPumpableDescription
Meltzona #12PDS
SDS
Meltzona #12 is a naturally occurring clay mineral which has been processed to yield a granular, free flowing powder suitable for gunning maintenance of metallurgical vessels. It is especially suited to ladle, iron transfer, and cupola applications.
Meltzona 516PDS
SDS
Meltzona 516 is a naturally occurring clay mineral which has been processed to yield a granular, free flowing powder suitable for gunning maintenance of metallurgical vessels. It is especially suited to ladle, iron transfer, and cupola applications.

Click here to submit a Request for Quote
or call us today at 205.338.3366