Contact Our Headquarters Today • 205.338.3366

Blast Furnace Lining Refactories for the Iron & Steel Industry

Having over 80 years of experience in the iron and steel refractory product industry, our vast collection of blast furnace lining refractories are tailored to any application you may require. Riverside offers a variety of mixes including, gunning, pumping, and shotcrete, for the blast furnace industry.

Additionally, we provide an assortment of reheat products for subhearth and working hearth that are resistant to both abrasion and scale buildup. For repair and re-profiled hearth, we offer refractory products used to produce skid blocks and skid rails, to take the main force off the slabs in order to extend the life of the working hearth.

Benefits of Blast Furnace Lining

  • Improved furnace fuel and consumption efficiencies
  • Extended life of working hearth with use of pre-cast shapes
  • Complete range of industrial and monolithic refractories
  • Resistance against abrasion

Riverside Refractory has an extensive inventory of refractories used for blast furnace lining to fit your application needs. If you have a question about a product or an application not listed on our site, please contact us by utilizing the form shown or by phone.

Iron & Steel Blast Furnace Refractory Applications:

Past ApplicationsDescriptionMore Information
Cast House/Melt Shop Floors
ALAKAST 40-P-ES ALAKAST 40-P-ES is a high-strength, pumpable product that has a wide variety of uses. Very strong and thermal shock resistant, it is the single product for all non- metal contact applications. PDS
SDS
Reheat Furnace Subhearth
ALAKAST 45-P ALAKAST 45-P is a blend of alumino-silicates with calcium aluminates, which develops high strength and is a volume-stable product. PDS
SDS
Reheat Furnace Working Hearth
ALAKAST 65-LC-P-SELECT ALAKAST 65-LC-P-SELECT is a low-cement, pumpable product which can be used in a variety of applications. PDS
SDS
ALAKAST 85-LC-P-ES ALAKAST 85-LC-P-ES is a fused alumina, pumpable product designed for high density and low porosity. PDS
SDS
ALAKAST 95-LC ALAKAST 95-LC is a tabular and white-fused alumna product utilized for producing precast shapes, which require extreme mechanical properties. PDS
SDS
ALAKAST 45-P ALAKAST 45-P is a blend of alumino-silicates with calcium aluminates, which develops high strength and is a volume-stable product. PDS
SDS
Reheat Furnace Walls
BLAST KAST 70-LC BLAST KAST 70-LC is a shotcrete product which has been formulated to provide dependable delivery and performance. PDS
SDS
BLAST KAST 70-LC-SELECT BLAST KAST 70-LC-SELECT is a shotcrete product that can be used as a general- maintenance material for various applications. It exhibits high strength and spall resistance. PDS
SDS
Reheat Furnace Insulating Walls
ALALITE 2050 ALALITE 2050 is a lightweight insulating castable offering excellent insulating characteristics. PDS
ALALITE 2260 ALALITE 2260 is a lightweight insulating castable offering excellent insulating characteristics. PDS
SDS
Reheat Furnace Roof
BLAST KAST 70-LC BLAST KAST 70-LC is a shotcrete product which has been formulated to provide dependable delivery and performance. PDS
SDS
ALAKAST 65-LC-P-SELECT ALAKAST 65-LC-P-SELECT is a low-cement, pumpable product which can be used in a variety of applications. PDS
SDS
Reheat Furnace General Maintenance
ALAGUN 70 ALAGUN 70 is is designed to provide superior performance in a wide range of applications. PDS
SDS
ALAGUN 50 ALAGUN 50 is a general-purpose gunning castable that provides for a superior performance in a wide range of applications. PDS
SDS
ALAGROUT 90 ALAGROUT 90 is a high-alumina-based product designed for various applications where extreme strengths are required. PDS
SDS
Roll Stands
ALAKAST 40-P-ES ALAKAST 40-P-ES is a high-strength, pumpable product that has a wide variety of uses. Very strong and thermal shock resistant, it is the single product for all non- metal contact applications. PDS
SDS
Skid Rail/Block
ALAKAST 95-LC ALAKAST 95-LC is a tabular and white-fused alumna product utilized for producing precast shapes, which require extreme mechanical properties. PDS
SDS
Wet Skids
ALAKAST 65-LC-M-EXTRA ALAKAST 65-LC-M-EXTRA is a low cement mullite based castable designed for high strength and thermal shock resistance. PDS
SDS
Iron Spout
ALAKAST 75-CF-SiC ALAKAST 75-CF-SiC is a castable product designed with fused alumina and fortified with silicon carbide. Large aggregate additions are to aid in the prevention of crack propagation. PDS
SDS
Tilting Spouts
ALAKAST 75-CF-SiC ALAKAST 75-CF-SiC is a castable product designed with fused alumina and fortified with silicon carbide. Large aggregate additions are to aid in the prevention of crack propagation. PDS
SDS
Trough Covers
ALAKAST 60-LC-TSR ALAKAST 60-LC-TSR is a low-cement castable designed to have high strength and thermal shock resistance. PDS
SDS
ALAKAST 70-LC ALAKAST 70-LC is a high-alumina, low-cement castable designed for severe service applications. This product was designed for applications requiring high mechanical strength and resistance to molten metal erosion when required. PDS
SDS
ALAKAST 80-CF ALAKAST 80-CF is a cement-free castable utilizing bauxite and fused aggregates. This product is designed for high-strength applications. PDS
SDS
Trough And Runner Repair
ALAPAK 75-SIC ALAPAK 75-SiC is a plastic/ramming material for general maintenance. A high performance product with excellent slag resistance. PDS
ALAKAST 75-ULC-SiC-MET ALAKAST 75-ULC-SiC-MET is a castable product wiith an addition of metals for greater durability and rapid drying. PDS
SDS
Trough and Runner
VIBEPAK 60 VIBEPAK 60 is a heat set product designed for applications requiring high strength and abrasion resistance. This product must be installed using mechanical vibration in order to achieve maximum density. PDS
VIBEPAK 85 VIBEPAK 85 is a heat set dry vibratable refractory. The use of alumina grains with SiC additions give s this product excellent hot metal and slag resistance. This product must be installed using mechanical vibration in order to achieve maximum density. PDS
Skimmer Blocks
ALAKAST 70-CF-SiC ALAKAST 70-CF-SiC is a cement-free castable containing large aggregate to aid in crack resistance. This product is fortified with silicon carbide for use in slagging and reducing conditions when required. PDS
SDS
Blast Furnace Grouting
ALAGROUT 80 ALAGROUT 80 is a high alumina, air setting grout. This has been designed to pump at a low water content, yet retain excellent strength in service. PDS
SDS
ALAGROUT 50 ALAGROUT 50 is a dry, air setting grout. This product is designed to be pumpable. PDS
SDS
Blast Furnace Stack
ALAGROUT 30-30-SIC
SDS
Blast Furnace Patch
ALAPAK 75-SIC ALAPAK 75-SiC is a plastic/ramming material for general maintenance. A high performance product with excellent slag resistance. PDS
Blast Furnace Trough/Runner
ALAKAST 75-ULC-SiC-MET ALAKAST 75-ULC-SiC-MET is a castable product wiith an addition of metals for greater durability and rapid drying. PDS
SDS
Blast furnace Trough Safety Lining
VIBEPAK 60-BF VIBEPAK 60- BF is a heat set product designed for applications requiring high strength and abrasion resistance. Mechanical vibration is recommended in order to achieve maximum density. PDS
Hot Metal Cars
ALAKAST 40-P-ES ALAKAST 40-P-ES is a high-strength, pumpable product that has a wide variety of uses. Very strong and thermal shock resistant, it is the single product for all non- metal contact applications. PDS
SDS
BLAST KAST 70-LC BLAST KAST 70-LC is a shotcrete product which has been formulated to provide dependable delivery and performance. PDS
SDS
Hot Metal Car Tops
ALAKAST 55-LC-SiC ALAKAST 55-LC is a high-strength product that has been designed to exhibit good thermal shock resistance. PDS
SDS
Annealing Base
Tundish Safety Lining
ALAKAST 70-LC ALAKAST 70-LC is a high-alumina, low-cement castable designed for severe service applications. This product was designed for applications requiring high mechanical strength and resistance to molten metal erosion when required. PDS
SDS
ALAKAST 65-LC-M-EXTRA ALAKAST 65-LC-M-EXTRA is a low cement mullite based castable designed for high strength and thermal shock resistance. PDS
SDS
Tundish Safety Lining Maintenance
ALAGUN 70 ALAGUN 70 is is designed to provide superior performance in a wide range of applications. PDS
SDS
Tundish Dam/Baffle
ALAKAST 70-LC ALAKAST 70-LC is a high-alumina, low-cement castable designed for severe service applications. This product was designed for applications requiring high mechanical strength and resistance to molten metal erosion when required. PDS
SDS
Delta/Donut Section
ALAKAST 85-ULC ALAKAST 85-ULC is a high-alumina-based product designed for various applications where extreme strengths are required. PDS
SDS
ALAKAST 70-LC ALAKAST 70-LC is a high-alumina, low-cement castable designed for severe service applications. This product was designed for applications requiring high mechanical strength and resistance to molten metal erosion when required. PDS
SDS
Steel Runner
ALAMASP 95-LC ALAMASP 95-LC is a tabular alum ina, spinel castable. It has been developed for severe wear areas in severe applications. PDS
SDS
Tuyere Packing
SUPERBLACK SUPERBLACK is a high silica, heat se tting plastic used for maintenance of runners and for a blast furnace taphole mate rial. This product exhibits good slag resistance due to the silicious aggregate and carbon additions. It is very plastic and ideal for plugging tuyeres. PDS
SDS
Slag Spout
ALAKAST 75-ULC-SiC-MET ALAKAST 75-ULC-SiC-MET is a castable product wiith an addition of metals for greater durability and rapid drying. PDS
ALAKAST 75-LC-SIC ALAKAST 75-CF-SiC is a castable product designed with fused alumina and fortified with silicon carbide. Large aggregate additions are to aid in the prevention of crack propagation. PDS
SDS
Slag Runner
ALAKAST 75-ULC-SiC-MET ALAKAST 75-ULC-SiC-MET is a castable product wiith an addition of metals for greater durability and rapid drying. PDS
SDS
Slag Pit Walls
ALAGUN 45 ALAGUN 45 is a conventional gunning product which can be utilized in a variety of applications. PDS
SDS
Steel Ladle Rings
ALAKAST 70-LC ALAKAST 70-LC is a high-alumina, low-cement castable designed for severe service applications. This product was designed for applications requiring high mechanical strenth and resistance to molten metal erosion when required. PDS
SDS
Steel ladle Covers
ALAKAST 50-TSR ALAKAST 50-TSR is a product designed as an all-purpose castable that develops high strengths and exhibits good thermal shock resistance. PDS
SDS
Steel Ladle Lining
ALAMASP 95-LC ALAMASP 95-LC is a tabular alum ina, spinel castable. It has been developed for severe wear areas in severe applications. PDS
SDS
Torpedo Ladles
ALAKAST 85-ULC ALAKAST 85-ULC is a high-alumina-based product designed for various applications where extreme strengths are required. PDS
SDS
Recuperator Lining
BLAST KAST 70-LC BLAST KAST 70-LC is a shotcrete product which has been formulated to provide dependable delivery and performance. PDS
SDS
Stock House Material Handling Bins
ALAGUN 45 ALAGUN 45 is a conventional gunning product which can be utilized in a variety of applications. PDS
SDS
Coke Oven Jamb
ALAOX 20-SLURRY ALAOX 20-SLURRY is a pyrophyllite based slurry product with a heat setting phosphate binder system. This product was designed for hot applications only. PDS
SDS
Coke Oven Mortar
ALASET 40-3000-SPECIAL ALASET 40-3000-SPECIAL is a alumina-based, low-iron, air-setting, super-duty mortar with high strength at all temperature ranges. PDS
SDS
Patching material
ALAOX 20-SLURRY ALAOX 20-SLURRY is a pyrophyllite based slurry product with a heat setting phosphate binder system. This product was designed for hot applications only. PDS
SDS
Coke Warf
ALAKAST 40-P-ES ALAKAST 40-P-ES is a high-strength, pumpable product that has a wide variety of uses. Very strong and thermal shock resistant, it is the single product for all non- metal contact applications. PDS
SDS
ALAGUN 45 ALAGUN 45 is a conventional gunning product which can be utilized in a variety of applications. PDS
SDS
Coke Oven Bench
ALAKAST 55-CF-P ALAKAST 55-CF-P is a cement-free, pumpable castable designed to have excellent strengths at various temperatures and applications. PDS
SDS
ALAKAST 50-TSR ALAKAST 50-TSR is a product designed as an all-purpose castable that develops high strengths and exhibits good thermal shock resistance. PDS
SDS
Coke Oven Stand Pipes
ALAKAST 50-TSR ALAKAST 50-TSR is a product designed as an all-purpose castable that develops high strengths and exhibits good thermal shock resistance. PDS
SDS
Anneal Base Pedastals
ALAKAST 85-ULC ALAKAST 85-ULC is a high-alumina-based product designed for various applications where extreme strengths are required. PDS
SDS

Click here to submit a Request for Quote
or call us today at 205.338.3366